(closed)Wta: Sapa tau ada yg kenal?

by Dedi Sopian » Thu, 06 May 2010 13:42:26 GMT


Sponsored Links
 Oke sudah tersambung sama yg bersangkutan. Thanks ingpownya.




ada google
tinggal search aja.
privacy is all lost :)








-- 
"



Other Threads

1. Milestone tiba2 mati.

Rekan2,
Ternyata setelah dipantau, milestone saya agak sering tiba2 power off..
(LED merah nyala, terus loading tulisan ANDROID - tanpa ada tulisan
motorola)

Apps yang diinstal :
handcent sms - battery indicator pro - twidroid pro - shop shavvy -
Adv task killer - quick setting - ebuddy - dolphin.
Ada hubungannya dengan aplikasi di atas?

lanjutan dari thread ini:

2. Android Gadget driver on PXA27X board

Hi,

I working on porting Linux + Android on our hardware which is a PXA27X
based board. I have enabled switch and USB gadget driver for the
same. But seems to be not working. And I am getting the following
message while booting

               pxa27x_udc: version 2008-04-18
               android init
               android_bind
               mass_storage_function_add
               android_usb gadget: Number of LUNs=1
               adb_function_add
               adb gadget driver failed to initialize
               usb_add_config failed
               pxa27x-udc pxa27x-udc: bind to driver android_usb -->
error -19

I have tried other usb gadget profiles like Ethernet Gadget, Gadget
None,etc . they are getting loaded and seems to be working too. Is
there any dependency that needs to be enabled to Android gadget to
work?

Regards
--
Vaisakh P S
(http://www.google.com/profiles/VaisakhRulez)



Here is the full log which i got from dmesg

# dmesg
Linux version 2.6.27-00127-gf92ea03-dirty (embeddedh...@embeddedhost-
desktop) (gcc version 4.3.4 (crosstool-NG-1.5.3) ) #477 PREEMPT Fri
Feb 11 11:47:17 IST 2011
CPU: XScale-PXA270 [69054114] revision 4 (ARMv5TE), cr=0000397f
Machine: Keith und Koep Trizeps IV module
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c03eac3c, node_mem_map c0463000
  DMA zone: 16256 pages, LIFO batch:3
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 416.00MHz (*2.0, active)
Memory clock: 104.00MHz (/2)
System bus clock: 208.00MHz
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
16256
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 noinitrd
init=/sbin/init display=lcd rootfstype=ext2 rw nohz=off
video=pxafb:mode:320x240-16,active androidboot.console=ttyS0
Unknown boot option `androidboot.console=ttyS0': ignoring
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
ram_console: buffer 00000000, invalid size 0, datasize -12
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60420KB available (3720K code, 596K data, 136K init)
Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 440 bytes
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
 : Enabling slave mode
I2C: i2c-1: PXA I2C adapter, slave address 1
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
ashmem: initialized
JFFS2 version 2.2. (NAND)  2001-2006 Red Hat, Inc.
fuse init (API version 7.9)
msgmni has been set to 118
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
console [ttyS0] enabled
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
brd: module loaded
loop: module loaded
usbcore: registered new interface driver ub
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
Uniform Multi-Platform E-IDE driver
Driver 'sd' needs updating - please use bus_type methods
Probing <NULL> at physical address 0x00000000 (16-bit bankwidth)
LL>: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
LL>: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code
brokenness.
Searching for RedBoot partition table in <NULL> at offset 0x7fe0000
No RedBoot partition table detected in <NULL>
Creating 6 MTD partitions on "<NULL>":
0x00000000-0x00040000 : "Bootloader"
rfd_ftl: no RFD magic found in 'Bootloader'
ftl_cs: FTL header not found.
0x00040000-0x00440000 : "Kernel"
rfd_ftl: no RFD magic found in 'Kernel'
ftl_cs: FTL header not found.
0x00500000-0x00b00000 : "Initrd"
rfd_ftl: no RFD magic found in 'Initrd'
ftl_cs: FTL header not found.
0x00b00000-0x01500000 : "AndroidRootFs"
rfd_ftl: no RFD magic found in 'AndroidRootFs'
ftl_cs: FTL header not found.
0x01600000-0x04d00000 : "AndroidSystem"
rfd_ftl: no RFD magic found in 'AndroidSystem'
ftl_cs: FTL header not found.
0x05000000-0x06400000 : "AndroidUserFiles"
rfd_ftl: no RFD magic found in 'AndroidUserFiles'
ftl_cs: FTL header not found.
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
trizeps4_ohci_init: ++
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
rhsc
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: PXA27x OHCI
usb usb1: Manufacturer: Linux 2.6.27-00127-gf92ea03-dirty ohci_hcd
usb usb1: SerialNumber: pxa27x
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using pxa27x-ohci and address 2
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 01 00 00 40 00
drivers/usb/host/ohci-dbg.c: data(18/64): 12 01 00 02 09 00 00 40 e3
05 08 06 01 09 00 01... stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 00 05 02 00 00 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 01 00 00 12 00
drivers/usb/host/ohci-dbg.c: data(18/18): 12 01 00 02 09 00 00 40 e3
05 08 06 01 09 00 01... stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 02 00 00 09 00
drivers/usb/host/ohci-dbg.c: data(9/9): 09 02 19 00 01 01 00 e0 32
stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 02 00 00 19 00
drivers/usb/host/ohci-dbg.c: data(25/25): 09 02 19 00 01 01 00 e0 32
09 04 00 00 01 09 00... stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 03 00 00 ff 00
drivers/usb/host/ohci-dbg.c: data(4/255): 04 03 09 04 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 01 03 09 04 ff 00
drivers/usb/host/ohci-dbg.c: data(22/255): 16 03 55 00 53 00 42 00 32
00 2e 00 30 00 20 00... stat:0
usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/host/ohci-dbg.c: setup(8): 00 09 01 00 00 00 00 00
hub 1-1:1.0: USB hub found
drivers/usb/host/ohci-dbg.c: setup(8): a0 06 00 29 00 00 0f 00
drivers/usb/host/ohci-dbg.c: data(9/15): 09 29 04 e0 00 32 64 00 ff
stat:0
hub 1-1:1.0: 4 ports detected
drivers/usb/host/ohci-dbg.c: setup(8): 80 00 00 00 00 00 02 00
drivers/usb/host/ohci-dbg.c: data(2/2): 01 00 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): a0 00 00 00 00 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 00 00 00 00 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 23 03 08 00 01 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): 23 03 08 00 02 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): 23 03 08 00 03 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): 23 03 08 00 04 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 01 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 00 01 00 00 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 02 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 00 01 00 00 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 03 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 01 03 01 00 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 23 01 10 00 03 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 04 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 00 01 00 00 stat:0
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
usbcore: registered new interface driver usb-storage
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 03 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 01 03 00 00 stat:0
USB Mass Storage support registered.
pxa27x_udc: version 2008-04-18
drivers/usb/host/ohci-dbg.c: setup(8): 23 03 16 00 03 00 00 00
android init
drivers/usb/host/ohci-dbg.c: setup(8): 23 03 04 00 03 00 00 00
android_bind
android_bind_config
mass_storage_function_add
android_usb gadget: Number of LUNs=1
adb_function_add
drivers/usb/host/ohci-dbg.c: data(1/1): 08 stat:0
adb gadget driver failed to initialize
usb_add_config failed
pxa27x-udc pxa27x-udc: bind to driver android_usb --> error -19
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 03 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 03 03 10 00 stat:0
mice: PS/2 mouse device common for all mice
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
drivers/usb/host/ohci-dbg.c: data(1/1): 08 stat:0
i2c /dev entries driver
SA1100/PXA2xx Watchdog Timer: timer margin 60 sec
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
drivers/usb/host/ohci-dbg.c: data(1/1): 08 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 23 01 14 00 03 00 00 00
usb 1-1.3: new low speed USB device using pxa27x-ohci and address 3
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 01 00 00 40 00
drivers/usb/host/ohci-dbg.c: data(18/64): 12 01 10 01 00 00 00 08 6d
04 15 c3 00 28 01 02... stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 23 03 04 00 03 00 00 00
drivers/usb/host/ohci-dbg.c: data(1/1): 08 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 03 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 03 03 10 00 stat:0
drivers/usb/host/ohci-dbg.c: data(1/1): 08 stat:0
drivers/usb/host/ohci-dbg.c: data(1/1): 08 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 23 01 14 00 03 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): 00 05 03 00 00 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 01 00 00 12 00
drivers/usb/host/ohci-dbg.c: data(18/18): 12 01 10 01 00 00 00 08 6d
04 15 c3 00 28 01 02... stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 02 00 00 09 00
drivers/usb/host/ohci-dbg.c: data(9/9): 09 02 22 00 01 01 00 a0 32
stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 02 00 00 22 00
drivers/usb/host/ohci-dbg.c: data(34/34): 09 02 22 00 01 01 00 a0 32
09 04 00 00 01 03 01... stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 00 03 00 00 ff 00
drivers/usb/host/ohci-dbg.c: data(4/255): 04 03 09 04 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 02 03 09 04 ff 00
drivers/usb/host/ohci-dbg.c: data(44/255): 2c 03 4c 00 6f 00 67 00 69
00 74 00 65 00 63 00... stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 80 06 01 03 09 04 ff 00
drivers/usb/host/ohci-dbg.c: data(18/255): 12 03 4c 00 6f 00 67 00 69
00 74 00 65 00 63 00... stat:0
usb 1-1.3: configuration #1 chosen from 1 choice
drivers/usb/host/ohci-dbg.c: setup(8): 00 09 01 00 00 00 00 00
usb 1-1.3: New USB device found, idVendor=046d, idProduct=c315
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Logitech USB Keyboard
usb 1-1.3: Manufacturer: Logitech
drivers/usb/host/ohci-dbg.c: setup(8): 21 0a 00 00 00 00 00 00
drivers/usb/host/ohci-dbg.c: setup(8): a3 00 00 00 03 00 04 00
drivers/usb/host/ohci-dbg.c: data(4/4): 03 03 00 00 stat:0
drivers/usb/host/ohci-dbg.c: setup(8): 81 06 00 22 00 00 40 00
drivers/usb/host/ohci-dbg.c: data(64/64): 05 01 09 06 a1 01 05 07 19
e0 29 e7 15 00 25 01... stat:0
input: Logitech Logitech USB Keyboard as /class/input/input0
mmc_decode_cid: manfid= 0x1b,oemid = 0x534d, Product Name = 00000
<4>mmc0: host does not support reading read-only switch. assuming
write-enable.
mmc0: new SD card at address 0002
mmcblk0: mmc0:0002 00000 994816KiB
 mmcblk0: p1 p2 p3 p4
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-
pxa27x-1.3
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
pxa2xx_ac97_reset: cold reset timeout (GSR=0x0)
wm97xx-ts 0-0:WM9713,WM9714: detected a wm9713 codec
wm97xx-ts 0-0:WM9713,WM9714: setting pen detect pull-up to 8000 Ohms
wm97xx-ts 0-0:WM9713,WM9714: setting pressure measurement current to
200uA.<6>input: wm97xx touchscreen as /class/input/input1
ALSA device list:
  #0: pxa2xx-ac97 (Wolfson WM9713,WM9714)
TCP cubic registered
XScale iWMMXt coprocessor detected.
em_x270_display_ini: LCD Initialisation for platform
ssp_request: ssp->phys_base = 0x41900000, ssp->mmio_base = 0xc4804000,
ssp->port_id = 0x3, ssp->pdev = 0xc03d1638,
ssp_request: ssp->phys_base = 0x41700000, ssp->mmio_base = 0xc4802000,
ssp->port_id = 0x2, ssp->pdev = 0xc03d1518,
ssp_request: ssp->phys_base = 0x41000000, ssp->mmio_base = 0xc4800000,
ssp->port_id = 0x1, ssp->pdev = 0xc03d13f8,
pxafb: palette_mem_size = 0x00000020
pxafb: Enabling LCD controller
fdadr0 0xa3a99c30
fdadr1 0x00000000
reg_lccr0 0x01b008f8
reg_lccr1 0x130924ef
reg_lccr2 0x0202053f
reg_lccr3 0x04700007
pxafb: LCD power on
em_x270_lcd_power: LCD Power On
===> em_x270_lcd_reset
Console: switching to colour frame buffer device 30x40
pxafb: backlight on
pxafb: backlight  function called
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 136K
#

-- 
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: 

3. How to run a class in background among a package of class

4. android selalu kalah di T3

5. force WebView to wait for images

6. *** Dev Tools - Terminal Emulator - sdcard ***

7. Weekpicker?