Low on space error - android-2.6.29 port to Overo TI OMAP 3503

by Elvis Dowson » Mon, 27 Apr 2009 22:01:55 GMT


Sponsored Links
 i,
I am getting a low on space error. I am using an 8GB microSD
card, with 2 partitions. The first FAT32 partition is 40MB and is
holds MLO, u-boot and uImage. The second partition is an ext3 parition
that holds the linux-kernel rootfs partition and the android userland
files.

A minute or so after bootup, the system screens starts to flicker
saying low on space in the upper left cornet with an icon, and then
all sort of errors keep getting displayed in the logs.

What can I do to fix this?

Best regards,

Elvis


I/DeviceStorageMonitorService( 867): Running low on memory. Sending
notification
D/dalvikvm( 867): GC freed 6004 objects / 338160 bytes in 78ms
request_suspend_state: sleep (0->3) at 105151519786 (2000-01-01
00:01:43.947296098 UTC)
D/SurfaceFlinger( 867): About to give-up screen, flinger = 0x185220
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
mmc0: card fe85 removed
MMC: killing requests for dead queue
PM: suspend devices took 0.367 seconds
Class driver suspend failed for cpu0
wakeup wake lock: mmc_delayed_work
PM: resume devices took 0.140 seconds
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
I/vold ( 833): MMC card 'SU0done.
8G' (serial 1343840484) @ /classsuspend: exit suspend, ret = 0
(2000-01-01 00:01:44.845855658 UTC)
/mmc_host/mmc0/mmc0:fe85 removed
mmc0: mmc_rescan - card ocr from io_op=0x00000000, err = -110
mmc0: host does not support reading read-only switch. assuming write-
enable.
mmc0: new high speed SDHC card at address fe85
I/vold ( 833): New MMC card EXT3-fs error (device mmcblk0p2):
ext3_find_entry: 'SU08G' (serial 1343840484) addereading directory
#227137 offset 0d @ /class/mmc_host/mmc0/mmc0:fe
85
Buffer I/O error on device mmcblk0p2, logical block 0
lost page write due to I/O error on mmcblk0p2
mmcblk1: mmc0:fe85 SU08G 7.57 GiB
mmcblk1: p1 p2
mmc1: mmc_rescan - card ocr from io_op=0x00000000, err = -110
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
mmc0: card fe85 removed
MMC: killing requests for dead queue
PM: suspend devices took 0.343 seconds
Class driver suspend failed for cpu0
wakeup wake lock: mmc_delayed_work
PM: resume devices took 0.140 seconds
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
EXT3-fs error (device mmcblk0p2): ext3_find_entry: I/vold ( 833):
MMC card 'SU0reading directory #300174 offset 08G' (serial 1343840484)
@ /class/mmc_host/mmc0/mmc0:fe85 removed

------------[ cut here ]------------
WARNING: at fs/buffer.c:1247 mark_buffer_dirty+0x38/0xd0()
done.
suspend: exit suspend, ret = 0 (2000-01-01 00:01:46.570617681 UTC)
Modules linked in:
[<c049594c>] (dump_stack+0x0/0x14) from [<c011a160>] (warn_slowpath
+0x68/0x9c)
[<c011a0f8>] (warn_slowpath+0x0/0x9c) from [<c01a33dc>]
(mark_buffer_dirty+0x38/0xd0)
r3:00100828<4>mmc0: mmc_rescan - card ocr from io_op=0x00000000, err
= -110
r2:00000000
r7:00000001 r6:cf472470 r5:c063b2e4 r4:cf472470
[<c01a33a4>] (mark_buffer_dirty+0x0/0xd0) from [<c01da714>]
(ext3_commit_super+0x50/0x6c)
r5:c06b



Low on space error - android-2.6.29 port to Overo TI OMAP 3503

by heyunh...@gmail.com » Mon, 27 Apr 2009 23:49:59 GMT


 aybe it will be fine.
i suggest u use less 2GB micSD Card.

On Apr 27, 10:44pm, Elvis Dowson <elvis.dow...@gmail.com> wrote:
--~--~---------~--~----~------------~-------~--~----~

-~----------~----~----~----~------~----~------~--~---


Sponsored Links


Low on space error - android-2.6.29 port to Overo TI OMAP 3503

by Elvis Dowson » Tue, 28 Apr 2009 02:00:13 GMT


 Hi,
     Ok, I have just got a 512MB microSD card and formatted the first
partition as FAT32 with 40MB, and the rest 447MB as ext3.

I still get the blinking screen after sometime. But will keep trying
again to see if I get the low space error again.

Elvis
--~--~---------~--~----~------------~-------~--~----~

-~----------~----~----~----~------~----~------~--~---



Low on space error - android-2.6.29 port to Overo TI OMAP 3503

by Elvis Dowson » Tue, 28 Apr 2009 03:00:05 GMT


 Hi,
     Well, for the moment, I don't have those low-disk space errors
any more.

Best regards,

Elvis
--~--~---------~--~----~------------~-------~--~----~

-~----------~----~----~----~------~----~------~--~---



Low on space error - android-2.6.29 port to Overo TI OMAP 3503

by heyunh...@gmail.com » Tue, 28 Apr 2009 09:40:56 GMT


 Congratulation
How do u solve low-disk space errors?
change SD Card to less 2GBThx.



--~--~---------~--~----~------------~-------~--~----~

-~----------~----~----~----~------~----~------~--~---



Low on space error - android-2.6.29 port to Overo TI OMAP 3503

by heyunh...@gmail.com » Tue, 28 Apr 2009 12:33:32 GMT


 OK.



--~--~---------~--~----~------------~-------~--~----~

-~----------~----~----~----~------~----~------~--~---



Low on space error - android-2.6.29 port to Overo TI OMAP 3503

by Elvis Dowson » Tue, 28 Apr 2009 17:06:44 GMT


 Yup, full confirmed. No more low on space error message!!
--~--~---------~--~----~------------~-------~--~----~

-~----------~----~----~----~------~----~------~--~---



Other Threads

1. Desperate call for help. Need complete reinstall of Android

I'm not quite sure if this is the right place to ask for help, but I'm
so desperate I'm going to do so anyway.

I was attempting to install the ARM EL Python minimal package from the
Debian stable repositories. I remounted /system as read-write, and
then copied the /sdcard/usr directory (containing Python) to /system/
usr. The copy worked. I then chmod Python to be executable, and then
try executing it. For some reason, it still does not let me execute
it.

So after a few attempts at executing Python, I run 'pwd'. A few
seconds after running pwd, the Android system goes completely
unresponsive. Suddenly, I'm back at the flashing Android screen.
Android appears to have crashed.

Not having realized all that has gone wrong yet, I go back to the
terminal application to take another crack at Python. For some reason,
whenever I press a key, the character ^@ is generated. I know I'm in
big trouble now.
It appears that the keyboard has stopped working at all. Only in the
terminal is any visible response generated. So I go and do a wipe of
the phone.

After doing the wipe, I encountered the "touch the android to
continue" screen and noticed that the same issue with the keyboard
still existed.

At this point, I think I will have to do a complete reinstall of
Android because my modifications were in /system.

Any method to bring my Android phone back to normal?

(What I'm thinking is to put get the firmware and put it into an
update.zip, but I do not have a microSD card reader and the phone
doesn't let me mount the microSD card because i have not filled in my
Google Account information.)

--~--~---------~--~----~------------~-------~--~----~

2. Fwd: Phone as a modem???

Sent this out last week and no response.... any help out there?

---------- Forwarded message ----------
From: "originalman20" <originalma...@gmail.com>
Date: Mar 13, 2009 9:52 PM
Subject: Phone as a modem???
To: <android-discuss@googlegroups.com>

I just rooted my G1 today... yayyy!! Lol only thing is i'd like to know if I
can now use my G1 as a Modem using my USB cable? Any help is appreciated. I
only have a wireless router and my PC doesn't pick up bluetooth or wifi on
its own. I used to connect my Tmobile dash and use that as a modem. Can I do
the same?

Thanks.

--~--~---------~--~----~------------~-------~--~----~

3. blogs

4. Jobs blogs

5. How to overlay animation upon a Vie

6. Notepadv1 tutorial

7. Problem with Notepadv1 tutorial